Mechanical parts
Left Arm Exoskeleton with Central Opening
- Bounding box
- 406.0 × 100.0 × 90.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Build a fully functional exoskeleton for a human left arm, designed to open down the middle—extending from the shoulder blade to the wrist.
Parameters
| Name | Value | Range |
|---|---|---|
| Scapula Plate Length | 140 mm | 80 – 250 |
| Scapula Plate Width | 100 mm | 60 – 180 |
| Plate Thickness | 5 mm | 2 – 10 |
| Mounting Hole Diameter | 5 mm | 3 – 10 |
| Upper Arm Link Length | 120 mm | 60 – 200 |
| Forearm Link Length | 140 mm | 60 – 220 |
| Link Width | 40 mm | 20 – 80 |
| Link Thickness | 10 mm | 4 – 20 |
| Joint Hole Diameter | 8 mm | 4 – 16 |
| Pin Diameter | 6 mm | 3 – 12 |
| Wrist Cuff Outer Diameter | 90 mm | 50 – 120 |
| Wrist Cuff Inner Diameter | 70 mm | 40 – 110 |
| Wrist Cuff Width | 40 mm | 20 – 60 |
| Central Opening Gap | 20 mm | 5 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.