Fittings and adapters
Laval Nozzle with Straight Outer Jacket
- Bounding box
- 50.0 × 50.0 × 105.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
import cadquery as cq import math L=45 ri,rt,re=10,0.5,12.5 wall=5 gap=5 jacket_ri=20 jacket_ro=25 overhang=10 def s(t): return (1-math.cos(math.pi*t))/2 def radius(z): if z<=L/2: return ri+(rt-ri)*s(z/(L/2)) return rt+(re-rt)*s((z-L/2)/(L/2)) pts=[] for i in range(201): z=L*i/200 r=radius(z) pts.append((r,z)) # inner nozzle wall outer=[(r+wall,z) for r,z in pts] profile=pts+outer[::-1] nozzle=(cq.Workplane("XZ") .polyline(profile).close() .revolve(360,(0,0),(0,1))) # Inlet inner pipe: 50 mm inner_pipe=(cq.Workplane("XY").workplane(offset=-50) .circle(15).circle(10).extrude(50)) inner=nozzle.union(inner_pipe) # Straight outer jacket: # inlet extension 40 mm, outlet overhang 10 mm jacket=(cq.Workplane("XY").workplane(offset=-40) .circle(jacket_ro).circle(jacket_ri) .extrude(95)) result=cq.Compound.makeCompound([ inner.val(),jacket.val() ]) cq.exporters.export(result,"Laval_Nozzle.step") cq.exporters.export(result,"Laval_Nozzle.stl") cq.exporters.export(result,"Laval_Nozzle.glb")
Parameters
| Name | Value | Range |
|---|---|---|
| Nozzle Inlet Radius | 5 mm | 2 – 12 |
| Throat Radius | 0.5 mm | 0.25 – 3 |
| Exit Radius | 12.5 mm | 5 – 13.5 |
| Nozzle Wall Thickness | 5 mm | 1.5 – 6 |
| Converging Length | 20 mm | 8 – 60 |
| Diverging Length | 40 mm | 15 – 100 |
| Inlet Pipe OD | 15 mm | 8 – 19 |
| Inlet Pipe ID | 10 mm | 4 – 14 |
| Pipe Protrusion Below Jacket | 10 mm | 0 – 40 |
| Jacket Inner Diameter | 40 mm | 24 – 80 |
| Jacket Outer Diameter | 50 mm | 26 – 100 |
| Jacket Length | 95 mm | 70 – 200 |
| Jacket Overhang Past Exit | 10 mm | 0 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Pneumatic Cylinder Assembly
parts: Front end cap, Guide bushing, Rear end cap, Cushioning piston, Piston rod, Piston, Cushioning piston, Cylinder barrel, Cylinder flange, Cushioning adjustment screw, and stan
Thorlabs SM1T2 Double-Male SM1 Adapter
I need a thorlabs SM1T2 adapter. Its an Sm1 to Sm1 adapter. The threading should be external
Modular Pyramid Rod Section
Design a 3D-printable modular tubular rod section for a portable, modular Great Pyramid of Giza wireframe. DIMENSIONS: - External diameter: 30 mm. - Internal diameter: 22 mm. - Wa
Adaptive back mesh panel
Adaptive mesh for form fitting humans
SM1 to SM1 Male-Male Adapter
I need an SM1 to SM1 threaded adapter. the treads should be external
