Fittings and adapters
Laval Nozzle with Outer Jacket
- Bounding box
- 55.0 × 55.0 × 45.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
import cadquery as cq import math # Dimensions in mm L = 45.0 D_IN = 20.0 D_THROAT = 1.0 D_OUT = 25.0 WALL = 4.0 GAP = 6.0 OUTER_WALL = 5.0 # Outer straight jacket jacket_inner_r = D_OUT / 2 + WALL + GAP jacket_outer_r = jacket_inner_r + OUTER_WALL # Smooth converging-diverging profile # Throat positioned at the midpoint z_throat = L / 2 def smooth(t): return 0.5 - 0.5 * math.cos(math.pi * t) def inner_radius(z): if z <= z_throat: t = z / z_throat return D_IN/2 + (D_THROAT/2 - D_IN/2) * smooth(t) else: t = (z-z_throat)/(L-z_throat) return D_THROAT/2 + (D_OUT/2-D_THROAT/2) * smooth(t) # Revolved nozzle wall n = 120 inner = [] outer = [] for i in range(n+1): z = L*i/n r = inner_radius(z) inner.append((r,z)) outer.append((r+WALL,z)) profile = inner + list(reversed(outer)) nozzle = ( cq.Workplane("XZ") .polyline(profile) .close() .revolve(360, (0,0), (0,1)) ) # Straight cylindrical outer jacket jacket = ( cq.Workplane("XY") .circle(jacket_outer_r) .circle(jacket_inner_r) .extrude(L) ) # Two separate concentric components assembly = cq.Compound.makeCompound([ nozzle.val(), jacket.val() ]) # Export cq.exporters.export(assembly, "Laval_Nozzle.step") cq.exporters.export(assembly, "Laval_Nozzle.stl") cq.exporters.export(assembly, "Laval_Nozzle.glb")
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 45 mm | 15 – 150 |
| Inlet diameter | 20 mm | 3 – 80 |
| Throat diameter | 1 mm | 0.4 – 25 |
| Outlet diameter | 25 mm | 3 – 100 |
| Shell wall thickness | 4 mm | 0.8 – 12 |
| Throat position (fraction of length) | 0.5 ratio | 0.2 – 0.8 |
| Jacket inner diameter | 45 mm | 10 – 200 |
| Jacket outer diameter | 55 mm | 12 – 220 |
| Jacket length | 45 mm | 15 – 150 |
| Profile segments per half | 120 count | 24 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Pneumatic Cylinder Assembly
parts: Front end cap, Guide bushing, Rear end cap, Cushioning piston, Piston rod, Piston, Cushioning piston, Cylinder barrel, Cylinder flange, Cushioning adjustment screw, and stan
Thorlabs SM1T2 Double-Male SM1 Adapter
I need a thorlabs SM1T2 adapter. Its an Sm1 to Sm1 adapter. The threading should be external
Modular Pyramid Rod Section
Design a 3D-printable modular tubular rod section for a portable, modular Great Pyramid of Giza wireframe. DIMENSIONS: - External diameter: 30 mm. - Internal diameter: 22 mm. - Wa
Adaptive back mesh panel
Adaptive mesh for form fitting humans
SM1 to SM1 Male-Male Adapter
I need an SM1 to SM1 threaded adapter. the treads should be external
