Mechanical parts
L-shaped electronics box with tapered posts and U-notch
- Bounding box
- 388.8 × 70.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
A csavarerősítő oszlop ne érjen le a doboz aljáig, hanem a felső harmad után simuljon bele az oldalfalba. A 190mm-es szár végén, a 20mm-es oldalban legyen egy U alakú kivágás a nyitott rész felől, 10mm szélesen és 15mm mélyen.
Parameters
| Name | Value | Range |
|---|---|---|
| Box overall length | 190 mm | 50 – 400 |
| Box overall width | 70 mm | 30 – 200 |
| Box height | 30 mm | 10 – 100 |
| Corner cutout length | 140 mm | 10 – 380 |
| Corner cutout width | 50 mm | 10 – 190 |
| Wall thickness | 2 mm | 1 – 10 |
| Bottom thickness | 2 mm | 1 – 10 |
| Rim depth from top | 2 mm | 1 – 10 |
| Rim width | 1 mm | 0.5 – 5 |
| Post diameter | 6 mm | 2 – 15 |
| Post blind hole diameter | 2 mm | 1 – 6 |
| Post blind hole depth | 10 mm | 2 – 25 |
| Lid thickness | 2 mm | 1 – 10 |
| Lid inset from outer edge | 1 mm | 0.2 – 5 |
| Lid assembly clearance per side | 0.2 mm | 0 – 2 |
| Lid through hole diameter | 2.4 mm | 1 – 6 |
| Layout gap between box and lid | 200 mm | 100 – 400 |
| Post straight upper height | 10 mm | 4 – 30 |
| Post blend/taper length | 6 mm | 0 – 25 |
| U-notch width | 10 mm | 3 – 20 |
| U-notch depth | 15 mm | 3 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.