Mechanical parts
Jet Engine Propeller and Shaft
- Bounding box
- 118.4 × 124.0 × 79.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
draw a jett engine propeller and shaft
Parameters
| Name | Value | Range |
|---|---|---|
| Number of blades | 5 mm | 2 – 9 |
| Propeller diameter | 130 mm | 60 – 250 |
| Blade pitch angle | 45 deg | 10 – 70 |
| Blade chord width | 24 mm | 10 – 60 |
| Blade thickness | 4 mm | 1.5 – 10 |
| Hub base diameter | 26 mm | 14 – 60 |
| Hub height | 26 mm | 10 – 80 |
| Shaft diameter | 12 mm | 5 – 30 |
| Shaft height above base | 74 mm | 40 – 250 |
| Base flange diameter | 34 mm | 14 – 100 |
| Base flange height | 8 mm | 3 – 30 |
| Hub bottom height above base | 40 mm | 10 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
