Mechanical parts
Jandarma Logo Plaque
- Bounding box
- 100 × 70 × 10 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Taban kalınlığı 5 mm yazı ve sembollerin boyutu taban üzerinden 5 mm yükseklikte jandarma logosu oluştur
Parameters
| Name | Value | Range |
|---|---|---|
| Plaque width | 100 mm | 40 – 200 |
| Plaque depth | 70 mm | 30 – 150 |
| Base plate thickness | 5 mm | 2 – 12 |
| Height of text and symbols above base | 5 mm | 1 – 12 |
| Corner radius of the plate | 8 mm | 0 – 20 |
| Emblem ring outer diameter | 44 mm | 20 – 80 |
| Emblem ring wall thickness | 4 mm | 1.5 – 10 |
| Emblem centre Y offset | 8 mm | -20 – 20 |
| Size of the letter J | 26 mm | 8 – 60 |
| Title text size | 12 mm | 4 – 30 |
| Title text Y position | -22 mm | -32 – 10 |
| Decorative star diameter | 8 mm | 3 – 20 |
| Star X offset | 40 mm | 10 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.