Mechanical parts
ISDT N24 Multiboard Endcap Cradle
- Bounding box
- 207.7 × 58.5 × 90.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
how about 2 endcaps that would house the isdt n24 and fasten to multiboard with bolts
Parameters
| Name | Value | Range |
|---|---|---|
| Charger length, X | 200 mm | 60 – 320 |
| Charger height, Z | 70 mm | 20 – 160 |
| Charger depth, Y | 45 mm | 15 – 110 |
| Depth of each end cap along X | 20 mm | 8 – 60 |
| Wall thickness | 3 mm | 1.2 – 6 |
| Sliding clearance per side | 0.25 mm | 0.1 – 1 |
| Axial clearance at the end stop | 0.6 mm | 0 – 5 |
| Front retaining lip height | 16 mm | 6 – 60 |
| Top retaining lip depth, Y | 10 mm | 4 – 40 |
| Snap peg diameter | 7.9 mm | 7 – 8 |
| Snap peg length | 7 mm | 3 – 14 |
| M3 bolt clearance hole | 3.4 mm | 2.5 – 6 |
| Bolt head counterbore diameter | 6.2 mm | 4 – 12 |
| Bolt hole spacing, X | 25 mm | 10 – 60 |
| Bolt tab height above the top rail | 14 mm | 8 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
