Mechanical parts
Industrial Robot Arm (<=240 mm segments)
- Bounding box
- 546.8 × 160.0 × 368.9 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
Build me a industrial robotic arm. I want every part seperately generated. Each arm segment should have a maximum length of 240mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Diameter | 160 mm | 80 – 260 |
| Base Plate Height | 16 mm | 6 – 40 |
| Base Column Diameter | 90 mm | 40 – 150 |
| Base Column Height | 64 mm | 30 – 120 |
| Mounting Bolt Circle Dia | 120 mm | 60 – 220 |
| Mounting Hole Dia (M8 clr) | 9 mm | 4 – 16 |
| Mounting Hole Count | 4 count | 3 – 8 |
| Base Plate Top Fillet | 5 mm | 0 – 12 |
| Upper Arm Length (joint c/l) | 220 mm | 120 – 240 |
| Upper Arm Profile Height | 60 mm | 30 – 120 |
| Upper Arm Thickness | 34 mm | 12 – 80 |
| Forearm Length (joint c/l) | 200 mm | 120 – 240 |
| Forearm Profile Height | 48 mm | 24 – 100 |
| Forearm Thickness | 28 mm | 12 – 70 |
| Max Segment Length Cap | 240 mm | 100 – 240 |
| Shoulder Hub Diameter | 70 mm | 30 – 140 |
| Shoulder Hub Length | 80 mm | 30 – 160 |
| Elbow Hub Diameter | 64 mm | 28 – 120 |
| Elbow Hub Length | 64 mm | 24 – 140 |
| Wrist Hub Diameter | 52 mm | 24 – 100 |
| Wrist Hub Length | 46 mm | 20 – 120 |
| Joint Pin / Bore Dia | 20 mm | 6 – 30 |
| Shoulder Angle | 60 deg | 10 – 90 |
| Forearm Angle | 10 deg | -30 – 70 |
| Gripper Body Length | 60 mm | 30 – 120 |
| Gripper Body Width | 70 mm | 30 – 140 |
| Gripper Body Height | 40 mm | 20 – 80 |
| Finger Length | 90 mm | 30 – 180 |
| Finger Thickness | 12 mm | 5 – 30 |
| Finger Opening (gap) | 50 mm | 15 – 120 |
| Finger Height | 26 mm | 10 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.