Industrial Gantry Portal Crane Assembly

"A highly detailed 3D CAD assembly render of the entire industrial Gantry portal crane system (Toàn bộ Khung dầm Gantry), isometric overall view on a studio white background, showcasing a dual-column heavy-duty structure spanning over two conveyor lines, designed using SolidWorks. Main Gantry Frame Structure: Two vertical columns made of 100x100mm extruded aluminum profiles (NHÔM ĐỊNH HÌNH 100x100) with visible multi-T-slots on all 4 faces. Vertical height is ~1600-1800mm. A heavy-duty horizontal bridge beam (DẦM NGANG 100x160) spanning ~1500-1600mm across, made of 100x160mm rectangular hollow steel, bolted securely at both ends to the vertical columns. Heavy triangular steel gussets (GÂN TĂNG CỨNG) 10mm thick with multiple bolts at the upper corners connecting the columns and the horizontal beam. Heavy steel base plates (BẢN MÃ CHÂN ĐẾ 10mm thick) at the bottom of each column, anchored with visible M16/M18 floor bolts to a simulated factory floor. Horizontal Motion (X-Axis) & Vertical Lift (Z-Axis): Mounted on the face of the bridge beam are dual parallel HIWIN HGR25 linear rail guides with 4 slide blocks (HGH25CA) carrying a sliding carriage plate (XE CON TRỤC X). On top of the beam, an SMC CDM2B40-600Z horizontal pneumatic cylinder with a 600mm stroke is mounted, connected to the carriage plate via a JA40 floating joint. Mounted vertically on the moving carriage plate is a heavy SMC MGPM63-200Z 3-rod guided cylinder (XI LANH 3 TY TRỤC Z) with a 200mm vertical stroke, with air hoses attached. At the bottom of the Z-axis is the 4-corner centering L-pad frame (KHUNG MÁ TÌ 4 GÓC CHỮ L) and the drop-down U-shaped hook arm (CÁNH TAY MÓC CHỮ U) clamping a ghosted upright water dispenser.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.