Mechanical parts
Indian Temple-Pavilion Perfume Cap
- Bounding box
- 45.0 × 45.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 39
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
3. Four pillars: Create exactly four identical ornate corner pillars. Each must have a stepped pedestal, fluted vertical shaft, concentric decorative rings, collars and an elaborate capital. Arrange symmetrically and connect them with four horizontal beams. Keep the spaces between pillars open. 4. Connecting beams: Add four robust square-section beams with raised borders and shallow traditional Indian geometric or floral relief. Maintain alignment and structural strength. 5. Temple roof: Create a four- or five-tier square roof with progressively smaller tiers, broad overhanging eaves, stepped profiles, raised mouldings, recessed bands and actual 3D floral/geometric relief. Avoid a plain pyramid or flat roof. Add a small crown only if it fits within the 60 mm height.
Parameters
| Name | Value | Range |
|---|---|---|
| Lower plinth width | 45 mm | 30 – 80 |
| Overall height | 60 mm | 40 – 120 |
| Lower plinth height | 5 mm | 2 – 12 |
| Upper plinth height | 3 mm | 1 – 10 |
| Upper plinth width | 42 mm | 26 – 78 |
| Shrine cell width | 20 mm | 10 – 40 |
| Shrine cell / pillar height | 20 mm | 10 – 40 |
| Arch niche width | 9 mm | 4 – 24 |
| Arch spring line height | 4 mm | 1 – 12 |
| Arch niche depth | 2.5 mm | 0.5 – 8 |
| Pillar centre offset | 16 mm | 8 – 34 |
| Shaft diameter | 6 mm | 2 – 12 |
| Pedestal width | 8 mm | 3 – 16 |
| Pedestal height | 3 mm | 1 – 8 |
| Capital width | 9.5 mm | 4 – 20 |
| Capital height | 3 mm | 1 – 8 |
| Flute count | 8 pcs | 0 – 16 |
| Flute cutter diameter | 1.2 mm | 0.3 – 3 |
| Ring height | 0.8 mm | 0.2 – 2 |
| Ring diameter increase | 1 mm | 0.2 – 4 |
| Beam section width | 3.5 mm | 1.5 – 10 |
| Beam section height | 4 mm | 1.5 – 12 |
| Beam relief diamond size | 1.4 mm | 0.4 – 4 |
| Cornice width | 38 mm | 20 – 78 |
| Cornice height | 2.5 mm | 0.5 – 8 |
| Lowest roof tier width | 42 mm | 20 – 78 |
| Roof tier count | 4 pcs | 2 – 6 |
| Tier height | 2.8 mm | 1 – 8 |
| Tier inset per step | 3.5 mm | 1 – 10 |
| Eave overhang | 1.5 mm | 0 – 5 |
| Relief bosses per tier side | 3 pcs | 1 – 7 |
| Relief boss size | 1.2 mm | 0.3 – 3 |
| Neck diameter | 7 mm | 2 – 20 |
| Neck height | 2.5 mm | 0.5 – 8 |
| Finial disc diameter | 12 mm | 4 – 30 |
| Finial disc height | 1.6 mm | 0.5 – 6 |
| Finial ball diameter | 7 mm | 2 – 20 |
| Bottle-neck bore diameter | 14 mm | 4 – 34 |
| Bore depth | 12 mm | 2 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.