Jigs and fixtures
Hydraulic Parallel-Jaw Tray Gripper
- Bounding box
- 264.0 × 120.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
generate a gripper for robotic arm to pick up a plastic tray, 5 kg weight max, 600x600 size, 120 mm deep, with a border of 20 mm all around. Make the gripper hydraulically driven.
Parameters
| Name | Value | Range |
|---|---|---|
| Mounting Plate Length | 260 mm | 120 – 600 |
| Mounting Plate Width | 120 mm | 60 – 300 |
| Mounting Plate Thickness | 10 mm | 4 – 30 |
| Mounting Hole Diameter | 6.6 mm | 3 – 16 |
| Body Length | 120 mm | 60 – 300 |
| Body Width | 70 mm | 30 – 180 |
| Body Height | 40 mm | 20 – 120 |
| Jaw Channel Width | 24 mm | 12 – 90 |
| Jaw Channel Depth | 20 mm | 8 – 60 |
| Channel End Wall | 12 mm | 4 – 40 |
| Jaw Block Length | 34 mm | 16 – 120 |
| Jaw Block Height | 30 mm | 10 – 90 |
| Jaw Block Width | 40 mm | 12 – 140 |
| Jaw Opening | 24 mm | 4 – 200 |
| Finger Length | 40 mm | 5 – 160 |
| Finger Thickness | 10 mm | 3 – 40 |
| Finger Width | 30 mm | 8 – 120 |
| Tray Rim Border (drives grip opening) | 20 mm | 5 – 60 |
| Hydraulic Bore Diameter | 32 mm | 10 – 100 |
| Barrel Wall Thickness | 6 mm | 3 – 20 |
| Barrel Length | 60 mm | 24 – 200 |
| Piston Rod Diameter | 16 mm | 4 – 60 |
| Cylinder Mount Plate Thickness | 8 mm | 4 – 30 |
| Hydraulic Port Diameter | 6 mm | 2 – 16 |
| Lead Screw Diameter | 10 mm | 4 – 30 |
| Knob Across Corners | 34 mm | 12 – 90 |
| Knob Length | 14 mm | 5 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
