Mechanical parts
Horno de shawarma de barril
- Bounding box
- 184.7 × 184.7 × 986.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- October 24, 2026
Download
Free to download and use. See the terms.
The prompt
quiero hacer un horno para shawarma con un barril de de hierro que tiene 58 de circunferencia y 88 de alto.
Parameters
| Name | Value | Range |
|---|---|---|
| Circunferencia del barril (dato) | 580 mm | 300 – 1900 |
| Altura del barril (dato) | 880 mm | 400 – 1200 |
| Espesor de chapa | 2 mm | 1 – 6 |
| Angulo de abertura frontal | 150 deg | 60 – 180 |
| Faja inferior sin abrir | 70 mm | 20 – 200 |
| Faja superior sin abrir | 90 mm | 20 – 200 |
| Espesor de tapas | 3 mm | 1.5 – 8 |
| Diametro de ventilaciones | 10 mm | 4 – 20 |
| Numero de ventilaciones | 6 u | 3 – 12 |
| Diametro desague de grasa | 12 mm | 5 – 25 |
| Numero de patas | 3 u | 3 – 6 |
| Diametro de pata | 30 mm | 15 – 60 |
| Altura de pata | 40 mm | 10 – 150 |
| Diametro cubo motor | 50 mm | 25 – 90 |
| Altura cubo motor | 20 mm | 8 – 60 |
| Diametro varilla portacarne | 12 mm | 6 – 25 |
| Varilla sobre tapa | 60 mm | 20 – 200 |
| Disco portacarne | 120 mm | 60 – 150 |
| Altura disco portacarne | 140 mm | 60 – 400 |
| Espesor disco portacarne | 4 mm | 2 – 12 |
| Disco prensa superior | 60 mm | 30 – 100 |
| Arco placa quemador | 70 deg | 30 – 140 |
| Altura placa quemador | 500 mm | 150 – 800 |
| Espesor placa quemador | 6 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.