Mechanical parts
Hollow Shotgun Barrel with Under-Lug
- Bounding box
- 25 × 40 × 200 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single hollow cylindrical shotgun barrel 200 mm long with a 25 mm outer diameter and an 18.5 mm concentric through-hole bore. At the rear breech end, add a rectangular under-lug block on the bottom of the cylinder, 35 mm long, 10 mm wide, and 15 mm tall, with a 4 mm horizontal hinge pin hole drilled through the front bottom corner. Apply a 1.5 mm chamfer to the muzzle rim and all edges of the under-lug.
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel length | 200 mm | 100 – 400 |
| Outer diameter | 25 mm | 10 – 60 |
| Bore diameter | 18.5 mm | 4 – 40 |
| Under-lug length | 35 mm | 10 – 100 |
| Under-lug width | 10 mm | 4 – 40 |
| Under-lug height | 15 mm | 4 – 40 |
| Hinge pin hole diameter | 4 mm | 2 – 12 |
| Chamfer size | 1.5 mm | 0.4 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
