Mechanical parts
Hollow Doob Tube with Flip Cap and Living Hinge
- Bounding box
- 33.7 × 21.5 × 95.2 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
I need to make a hollow cannabis doob tube with a flip top connected with a living hinge. The tube dimensions are 12mm at the top, 90mm long with a 3 degree taper along the tube. Mold the tube, living hinge, and cap in an open position along a single straight parting line. The hinge thickness will be a target of 0.35mm with a 0.5mm entry radius.
Parameters
| Name | Value | Range |
|---|---|---|
| Top Diameter | 12 mm | 6 – 20 |
| Tube Length | 90 mm | 40 – 150 |
| Taper Angle | 3 deg | 0.5 – 10 |
| Wall Thickness | 1.5 mm | 0.8 – 3 |
| Bottom Thickness | 1.5 mm | 0.8 – 3 |
| Cap Outer Radius | 7.5 mm | 6 – 12 |
| Cap Height | 6 mm | 2 – 12 |
| Hinge Gap | 2 mm | 0.5 – 10 |
| Hinge Width | 10 mm | 3 – 25 |
| Hinge Thickness | 0.35 mm | 0.2 – 0.8 |
| Fillet Radius | 0.5 mm | 0.3 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.