Enclosures and housings
Hinged Box, Open 105° with Notches
- Bounding box
- 300.0 × 141.3 × 128.1 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
Now show the case open with the lid at 105 degrees. Add a finger notch centered on the front long edge of the base tray rim — 30mm wide, 4mm deep, with a 2mm radius at the bottom of the notch, machined into the top face of the front rim. Also add a small card relief notch in the top right corner of the interior tray rim — 15mm wide, 8mm deep, 4mm radius — this allows individual cards to be lifted from the deck."
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 300 mm | 50 – 500 |
| Width | 100 mm | 30 – 300 |
| Base Depth | 30 mm | 10 – 100 |
| Lid Depth | 15 mm | 5 – 50 |
| Wall Thickness | 2 mm | 1 – 10 |
| Magnet Diameter | 10 mm | 2 – 20 |
| Magnet Thickness | 3 mm | 1 – 10 |
| Magnet Offset from Center | 75 mm | 0 – 100 |
| Hinge Knuckle Diameter | 4 mm | 1 – 10 |
| Leaf Width (Z) | 8 mm | 2 – 20 |
| Leaf Thickness (Y) | 0.8 mm | 0.2 – 3 |
| Lid Open Angle | 105 deg | 0 – 180 |
| Finger Notch Width | 30 mm | 5 – 100 |
| Finger Notch Depth | 4 mm | 1 – 20 |
| Finger Notch Bottom Radius | 2 mm | 0.1 – 10 |
| Card Notch Width | 15 mm | 5 – 50 |
| Card Notch Depth | 8 mm | 1 – 20 |
| Card Notch Radius | 4 mm | 0.1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox