Mechanical parts
Heavy Vehicle Rear Axle Shaft
- Bounding box
- 900.0 × 200.1 × 200.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- October 10, 2026
Download
Free to download and use. See the terms.
The prompt
axil shaft for back hevy vehicles
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 900 mm | 300 – 1600 |
| Shaft Body Diameter | 50 mm | 20 – 120 |
| Shaft-to-Flange Fillet | 5 mm | 1 – 25 |
| Spline Length | 80 mm | 20 – 250 |
| Spline Tooth Count | 18 count | 6 – 48 |
| Spline Groove Width | 8 mm | 2 – 20 |
| Wheel Hub Flange Diameter | 200 mm | 100 – 400 |
| Flange Thickness | 25 mm | 8 – 80 |
| Stud Hole Count | 8 count | 4 – 20 |
| Stud Bolt Circle Diameter | 160 mm | 80 – 340 |
| Stud Hole Diameter | 22 mm | 8 – 40 |
| Flange Rim Chamfer | 2 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.