Mechanical parts
Handheld Multi-Roller Body Massager Assembly
- Bounding box
- 292.0 × 130.0 × 55.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of a handheld multi-roller body massager based on my sketch. It should have a polygonal loop frame with six cylindrical foam rollers arranged in two parallel rows of three, with larger central rollers and smaller side rollers. Include a central pivot joint, axles, spacers, and ergonomic grips. Keep every component separate, editable, and dimensionally adjustable. Make the assembly mechanically realistic and exportable as a STEP file.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length | 240 mm | 180 – 320 |
| Frame Width | 130 mm | 90 – 180 |
| Frame Thickness | 20 mm | 10 – 40 |
| Corner Chamfer | 18 mm | 5 – 35 |
| Corner Fillet Radius | 6 mm | 0 – 12 |
| Roller Bay Length | 190 mm | 120 – 220 |
| Roller Bay Width | 56 mm | 40 – 80 |
| Bay Corner Radius | 8 mm | 0 – 18 |
| Row Spacing | 62 mm | 45 – 90 |
| Axle Diameter | 8 mm | 4 – 16 |
| Axle Length | 250 mm | 190 – 320 |
| Retainer Collar Diameter | 12 mm | 8 – 20 |
| Retainer Collar Length | 5 mm | 2 – 10 |
| Side Roller Diameter | 40 mm | 25 – 60 |
| Side Roller Width | 45 mm | 25 – 70 |
| Center Roller Diameter | 55 mm | 35 – 75 |
| Center Roller Width | 55 mm | 30 – 80 |
| Roller Gap | 10 mm | 2 – 25 |
| Roller Edge Fillet | 2 mm | 0 – 5 |
| Spacer Outside Diameter | 14 mm | 9 – 22 |
| Spacer Length | 6 mm | 2 – 12 |
| Pivot Boss Diameter | 30 mm | 18 – 45 |
| Pivot Boss Length | 22 mm | 12 – 35 |
| Pivot Pin Diameter | 6 mm | 3 – 10 |
| Pivot Pin Length | 44 mm | 25 – 65 |
| Grip Length | 90 mm | 60 – 120 |
| Grip Diameter | 28 mm | 18 – 40 |
| Grip End Fillet | 4 mm | 0 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
