Mechanical parts
H-1 1:3 MG90S pimli yuk birakma
- Bounding box
- 48.0 × 46.0 × 15.7 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
Helvetia H-1 1:3 için MG90S servolu, ip halkasını tutan pimli kurtarma yükü bırakma yuvası (60 g test yükü)
Parameters
| Name | Value | Range |
|---|---|---|
| Plaka uzunluğu | 48 mm | 40 – 80 |
| Plaka genişliği | 46 mm | 40 – 70 |
| Plaka kalınlığı | 2.5 mm | 1.5 – 5 |
| Montaj deliği | 3.2 mm | 2 – 4 |
| Servo gövde boyu | 22.8 mm | 20 – 25 |
| Servo gövde eni | 12.2 mm | 11 – 14 |
| Kulak delik aralığı | 27.8 mm | 26 – 30 |
| Servo direği kalınlığı | 4 mm | 3 – 6 |
| Servo vida deliği | 1.8 mm | 1.5 – 2.5 |
| Pim deliği (2 mm tel) | 2.3 mm | 1.5 – 3.5 |
| İp halkası boşluğu | 10 mm | 6 – 16 |
| Pim yüksekliği | 8 mm | 5 – 14 |
| Kulak kalınlığı | 6 mm | 4 – 10 |
| Pim kulağı konumu (Y) | 18 mm | 12 – 24 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.