Jigs and fixtures
Great Pyramid Corner Connector
- Bounding box
- 107.0 × 107.0 × 117.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Design a precision-engineered detachable three-way base corner connector for a modular Great Pyramid of Giza wireframe. PYRAMID GEOMETRY: - Height: 1,200 mm. - Square base: 1,885 × 1,885 mm. - Four inclined rods: approximately 1,793 mm centre-line length. - Inclined rod angle: 51.84° relative to horizontal. - Horizontal base rods meet at 90°. SOCKET CONFIGURATION: Three receiving sockets: 1. First horizontal base rod. 2. Second horizontal base rod. 3. One inclined rod connecting to the apex. GEOMETRY: - Two horizontal sockets positioned at exactly 90°. - Inclined socket positioned at 51.84° above the horizontal base plane. - Inclined rod centre-line must point precisely towards the pyramid's vertical centreline and apex. - All three rod centre-lines must intersect at the same theoretical base corner point. - Compatible with the universal 30 mm diameter modular rod system. CONSTRUCTION: - Reinforced central body. - Keyed anti-rotation interfaces. - Positive mechanical locking compatible with the universal locking collar. - Detachable rod connections. - Rounded transitions around socket junctions. - Reinforced walls against cracking and deformation. - Replaceable locking components. - No permanent adhesive. FOOTING: Provide an integrated provision for a detachable, non-slip floor-contact foot without changing the rod centre-line geometry. SYMMETRY: Produce one standard connector design that can be rotated or mirrored appropriately for all four pyramid corners. CRITICAL REQUIREMENT: The inclined socket must have the correct three-dimensional orientation, not merely the correct inclination angle. Its horizontal projection must point towards the exact centre of the square base. PRINTING: Maximum printable dimensions: 210 × 210 × 250 mm. Split into printable components if necessary. Generate watertight, manifold STL files. Do not generate rods or the complete pyramid.
Parameters
| Name | Value | Range |
|---|---|---|
| Rod diameter | 30 mm | 10 – 40 |
| Socket clearance per side | 0.1 mm | 0.05 – 0.5 |
| Socket wall thickness | 4 mm | 2 – 8 |
| Central hub diameter | 64 mm | 40 – 100 |
| Socket length from corner point | 75 mm | 40 – 120 |
| Locking collar outside diameter | 42 mm | 30 – 60 |
| Locking collar length | 14 mm | 8 – 30 |
| Locking collar wall thickness | 1.8 mm | 1.2 – 5 |
| Collar start distance from corner point | 58 mm | 30 – 100 |
| Anti-rotation key length | 20 mm | 10 – 40 |
| Anti-rotation key width | 10 mm | 4 – 20 |
| Anti-rotation key depth | 6 mm | 3 – 12 |
| Key centre distance from corner point | 55 mm | 20 – 100 |
| Floor foot diameter | 55 mm | 30 – 80 |
| Floor foot height | 15 mm | 8 – 30 |
| Foot stem diameter | 18 mm | 10 – 30 |
| Foot stem height | 18 mm | 10 – 40 |
| Main body foot boss diameter | 32 mm | 20 – 50 |
| Inclined rod angle above horizontal | 51.84 deg | 30 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
