Mechanical parts
Gravity-safe S wardrobe hook (44 mm rod hook)
- Bounding box
- 56 × 12 × 120 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
CURRENT PROBLEM: The upper hook opening is at 3 o'clock position (90° sideways), causing the hook to slip off the rod when weight is applied. REQUIRED CORRECTIONS: 1. Rotate the upper hook opening to 315° (4-5 o'clock position, facing downward-right) to use gravity for secure holding 2. Ensure upper hook inner diameter is exactly 44mm (40mm rod + 4mm clearance) 3. Keep lower hook opening at 225° (7-8 o'clock position) for easy garment hanging 4. Maintain uniform 6mm wall thickness throughout 5. Add 2mm fillet radius to all sharp edges for printability 6. Total height should remain ~120mm, connecting bar 25mm long × 12mm diameter
Parameters
| Name | Value | Range |
|---|---|---|
| Upper hook inner diameter | 44 mm | 30 – 80 |
| Lower hook inner diameter | 25 mm | 10 – 60 |
| Ring wall thickness | 6 mm | 4 – 12 |
| Edge fillet radius | 2 mm | 0.5 – 3 |
| Upper opening slot width | 26 mm | 10 – 40 |
| Upper opening direction (deg, 0=+X, 90=up) | 315 mm | 180 – 355 |
| Lower opening slot width | 18 mm | 8 – 35 |
| Lower opening direction (deg, 0=+X, 90=up) | 225 mm | 120 – 330 |
| Total height | 120 mm | 80 – 200 |
| Exposed connecting bar length | 25 mm | 10 – 60 |
| Connecting bar diameter | 12 mm | 6 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
