Mechanical parts
FTC Silicone Intake Wheel Split Mold
- Bounding box
- 415.5 × 150 × 22 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Two-part mold for casting a 110 mm diameter, 20 mm wide radial-spoke FTC intake wheel. Provisional 8.2 mm across-flats hex bore gauge only; verify against actual goBILDA 8 mm REX shaft before casting.
Parameters
| Name | Value | Range |
|---|---|---|
| Wheel outside diameter | 110 mm | 80 – 140 |
| Cast wheel width | 20 mm | 12 – 30 |
| Outer rim radial thickness | 8 mm | 5 – 12 |
| Number of spokes | 12 mm | 6 – 16 |
| Spoke width | 6 mm | 3 – 10 |
| Hub outside diameter | 25 mm | 18 – 35 |
| Provisional hex bore across flats | 8.2 mm | 7.8 – 9.5 |
| Mold wall thickness | 12 mm | 8 – 20 |
| Alignment pin diameter | 5 mm | 3 – 8 |
| Alignment pin clearance | 0.3 mm | 0.1 – 0.6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.