Mechanical parts
FSAE Wheel Upright (simplified, mesh-study part)
- Bounding box
- 170.0 × 40.0 × 220.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D component for a mesh convergence study; resume-grade FSAE-style wheel upright with hub bore, ball-joint bosses, steering arm and brake caliper ear.
Parameters
| Name | Value | Range |
|---|---|---|
| Hub boss outer diameter | 70 mm | 50 – 90 |
| Bearing bore diameter | 52 mm | 30 – 66 |
| Hub length (along wheel axis) | 40 mm | 25 – 60 |
| Web width | 56 mm | 40 – 80 |
| Web thickness | 12 mm | 8 – 20 |
| Web half-height | 95 mm | 70 – 120 |
| Lightening slot length | 30 mm | 10 – 34 |
| Lightening slot width | 16 mm | 8 – 30 |
| Ball-joint boss diameter | 34 mm | 24 – 46 |
| Ball-joint boss height | 38 mm | 24 – 55 |
| Ball-joint taper hole diameter | 12 mm | 8 – 18 |
| Steering arm length | 80 mm | 50 – 110 |
| Steering arm thickness | 20 mm | 14 – 30 |
| Tie-rod hole diameter | 8 mm | 6 – 12 |
| Caliper bolt spacing | 76 mm | 50 – 100 |
| Caliper bolt hole diameter | 8.5 mm | 6 – 12 |
| Corner fillet radius | 4 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.