Mechanical parts
Front Wheel Module
- Bounding box
- 682.6 × 273.1 × 203.2 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create fabrication-ready TOP, SIDE, and BOTTOM views of the FRONT WHEEL MODULE for a flat-deck scooter. Deck: 24x10x1 in. Deck top at Y=3.0, underside at Y=2.0, ground at Y=0. Front wheel: 5.0 in diameter hub motor. Wheel center at X=2.5, Y=2.5. Wheel passes through deck. Cutout: circular, 5.25 in diameter, centered on wheel axis. Cylindrical boss: OD 4.5–5.0 in, height 1.0–1.5 in above deck, fillet radius 0.5–0.75 in. Head tube: OD 2.0 in, vertical or slight rake, wall 0.125–0.150 in. Fork: shaft through head tube; fork legs connect to wheel hub. Show legs in top and side views. Bottom view: show wheel cavity, boss underside, radial ribs and longitudinal ribs (2–2.5 mm thick). All views must be dimensioned and labeled.
Parameters
| Name | Value | Range |
|---|---|---|
| Deck Length | 24 in | 12 – 36 |
| Deck Width | 10 in | 6 – 16 |
| Deck Thickness | 1 in | 0.5 – 2 |
| Deck Top Height | 3 in | 2 – 5 |
| Cutout Diameter | 5.25 in | 4 – 7 |
| Cutout X Offset (from front) | 2.5 in | 1 – 6 |
| Boss Outer Diameter | 4.75 in | 4 – 6 |
| Boss Height | 1.25 in | 0.5 – 2 |
| Boss Fillet Radius | 0.63 in | 0.1 – 1 |
| Head Tube OD | 2 in | 1.5 – 3 |
| Head Tube Wall Thickness | 0.13 in | 0.1 – 0.25 |
| Head Tube Height | 5 in | 3 – 8 |
| Fork Shaft Diameter | 1.75 in | 1.5 – 2.5 |
| Fork Leg Radius | 0.13 in | 0.1 – 0.3 |
| Shaft Bottom Height | 2.7 in | 2 – 3.5 |
| Wheel Diameter | 5 in | 4 – 8 |
| Wheel Width | 1.5 in | 1 – 3 |
| Hub Diameter | 3 in | 2 – 4 |
| Axle Diameter | 0.5 in | 0.25 – 1 |
| Rib Thickness | 0.1 in | 0.05 – 0.2 |
| Rib Height | 0.5 in | 0.25 – 1 |
| Radial Rib Count | 4 | 2 – 8 |
| Radial Rib Length | 3 in | 1 – 5 |
| Longitudinal Rib Count | 3 | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.