Mechanical parts
Frame Drone 5 inch X + Slot GPS Belakang
- Bounding box
- 187.7 × 171.7 × 42 mm
- Engine
- 3D Printing B-rep
- Parameters
- 38
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Rebuild dari STL Frame_Drone_5_inch_Arm_X_Ramping_1503_FC_30_5_TOF: lebih detail + slot GPS di atas belakang
Parameters
| Name | Value | Range |
|---|---|---|
| Panjang body | 164 mm | 140 – 190 |
| Lebar body | 38 mm | 30 – 46 |
| Radius sudut body | 8 mm | 2 – 14 |
| Tebal plat bawah | 5 mm | 3 – 8 |
| Tinggi sisi bawah plat atas | 30 mm | 24 – 40 |
| Tebal plat atas tengah | 4 mm | 3 – 6 |
| Tebal plat atas di ujung | 2 mm | 1.6 – 4 |
| Pola lubang stack FC | 30.5 mm | 20 – 35 |
| Diameter lubang stack | 3.2 mm | 2.2 – 4 |
| Diameter tiang | 6.4 mm | 5 – 8 |
| Posisi X tiang samping | 52 mm | 40 – 60 |
| Posisi Y tiang samping | 9 mm | 5 – 14 |
| Lebar lengan di pangkal | 14 mm | 8 – 20 |
| Lebar lengan di ujung | 10 mm | 6 – 16 |
| Pangkal lengan X | 15 mm | 8 – 25 |
| Pangkal lengan Y | 17 mm | 8 – 25 |
| Posisi motor X | 84 mm | 70 – 95 |
| Posisi motor Y | 76 mm | 60 – 90 |
| Tinggi rib ramping di pangkal lengan | 4 mm | 0 – 8 |
| Diameter pad dudukan motor | 18 mm | 14 – 24 |
| Jarak lubang dudukan motor | 12 mm | 10 – 16 |
| Diameter lubang baut motor | 2.2 mm | 1.6 – 3.2 |
| Lubang tengah motor | 7 mm | 4 – 10 |
| Posisi slot strap baterai X | 36 mm | 25 – 45 |
| Panjang slot strap | 12 mm | 8 – 20 |
| Lebar slot strap | 3.4 mm | 2.5 – 5 |
| Radius lubang hex ringan | 5.2 mm | 3 – 7 |
| Jarak lubang hex | 17 mm | 12 – 22 |
| Posisi jendela TOF di sisi depan | 60 mm | 50 – 70 |
| Lebar jendela TOF | 7 mm | 4 – 10 |
| Panjang jendela TOF | 17 mm | 10 – 24 |
| Sisi belakang (1 = +X, -1 = -X) | 1 mm | -1 – 1 |
| Panjang modul GPS | 25 mm | 18 – 32 |
| Lebar modul GPS | 25 mm | 16 – 32 |
| Kedalaman slot GPS | 8 mm | 4 – 14 |
| Tebal dinding slot | 1.6 mm | 1.2 – 3 |
| Toleransi modul | 0.4 mm | 0.1 – 1 |
| Lebar celah kabel | 8 mm | 4 – 14 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.