Mechanical parts
Frame Drone 5 inch X 1503 v9 NDL
- Bounding box
- 194.4 × 178.2 × 43.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 25
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Frame drone 5 inch X 1503: dudukan motor satu lubang baut di tengah V (bawah V) pada setiap arm
Parameters
| Name | Value | Range |
|---|---|---|
| Jarak motor sumbu X | 168.4 mm | 150 – 190 |
| Jarak motor sumbu Y | 152.2 mm | 130 – 170 |
| Panjang plat bawah | 150 mm | 130 – 170 |
| Lebar body | 38 mm | 32 – 46 |
| Tebal plat bawah dan arm | 5 mm | 3 – 6 |
| Lebar arm | 10.5 mm | 6 – 16 |
| Jarak lubang baut dari pusat motor, di tengah V | 5.2 mm | 4.5 – 6 |
| Diameter lubang baut motor | 2.2 mm | 2 – 3 |
| Diameter lubang tengah motor | 6 mm | 4 – 8 |
| Tebal dinding ujung | 12 mm | 6 – 16 |
| Lebar jendela kiri | 16 mm | 8 – 24 |
| Lebar jendela kanan | 20 mm | 10 – 28 |
| Tinggi dasar plat atas | 30 mm | 22 – 40 |
| Tebal plat atas | 4 mm | 2 – 6 |
| Panjang plat atas | 160 mm | 140 – 172 |
| Tinggi cradle TOF GPS | 9 mm | 0 – 14 |
| Panjang slot lattice | 8 mm | 4 – 12 |
| Lebar slot lattice | 2.5 mm | 1.5 – 4 |
| Jarak antar slot lattice | 7 mm | 5 – 10 |
| Diameter kepala baut | 5.4 mm | 4 – 7 |
| Tinggi kepala baut | 1.8 mm | 1 – 3 |
| Tinggi huruf NDL | 9 mm | 3 – 10 |
| Tinggi timbul huruf | 1 mm | 0.6 – 2 |
| Posisi teks sumbu X, di depan cradle GPS | -44 mm | -50 – -40 |
| Posisi teks sumbu Y | 0 mm | -8 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.