Mechanical parts
Frame Drone 5 inch Arm X Ramping (1503, FC 30.5, TOF)
- Bounding box
- 194.0 × 178.0 × 34 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Frame drone 5 inch dengan arm X sejati (dua batang tipis bersilang di tengah), dudukan motor 1503 bentuk X, FC 30.5, spacer, lubang TOF
Parameters
| Name | Value | Range |
|---|---|---|
| Jarak motor depan-belakang dari tengah | 84 mm | 70 – 100 |
| Jarak motor kiri-kanan dari tengah | 76 mm | 60 – 95 |
| Lebar arm | 10 mm | 8 – 14 |
| Tebal arm / bottom plate | 5 mm | 4 – 6 |
| Panjang tiap batang X dudukan | 26 mm | 20 – 34 |
| Lebar tiap batang X dudukan | 7 mm | 6 – 10 |
| Diameter hub tengah dudukan | 14 mm | 12 – 18 |
| Diameter lingkaran 3 baut motor 1503 | 9 mm | 8 – 12 |
| Diameter lubang baut motor M2 | 2.4 mm | 2 – 3.2 |
| Lubang tengah motor | 5.5 mm | 4 – 7 |
| Panjang body | 150 mm | 120 – 170 |
| Lebar body, persegi panjang | 38 mm | 36 – 46 |
| Jarak antar plate / tinggi spacer | 25 mm | 20 – 35 |
| Tebal top plate | 4 mm | 3 – 5 |
| Diameter luar spacer | 6.5 mm | 6 – 9 |
| Lebar slot strap baterai | 20 mm | 12 – 25 |
| Jarak lubang TOF dari tengah ke belakang | 60 mm | 50 – 66 |
| Panjang jendela TOF arah depan-belakang | 7 mm | 5 – 12 |
| Lebar jendela TOF arah kiri-kanan | 12 mm | 8 – 18 |
| Jarak 2 baut M2 modul TOF | 16 mm | 10 – 22 |
| Jendela kamera FPV | 21 mm | 18 – 26 |
| Lebar slot XT60 | 16.5 mm | 12 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.