Mechanical parts
Frame Drone 5 inch 1503 - Slim Long Stretch-X v4
- Bounding box
- 200.3 × 165.9 × 32 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Frame drone 5 inch 1503, arm dibuat lebih ramping (kurus), body tetap
Parameters
| Name | Value | Range |
|---|---|---|
| Jarak motor ke tengah arah panjang | 85 mm | 70 – 115 |
| Jarak motor ke tengah arah lebar | 68 mm | 50 – 85 |
| Posisi pangkal arm dari tengah body | 30 mm | 15 – 50 |
| Tebal arm / plat bawah | 5 mm | 3 – 8 |
| Lebar arm di pangkal | 12 mm | 8 – 24 |
| Lebar arm di ujung | 8 mm | 6 – 16 |
| Diameter pad motor | 20 mm | 18 – 28 |
| Pola baut motor , cek motor kamu | 12 mm | 9 – 16 |
| Lubang tengah motor | 8 mm | 5 – 12 |
| Panjang body | 130 mm | 100 – 150 |
| Lebar body | 28 mm | 24 – 36 |
| Tinggi ruang stack | 24 mm | 18 – 34 |
| Tebal plat atas | 3 mm | 2 – 4 |
| Pola baut stack FC/ESC | 20 mm | 16 – 30.5 |
| Lebar slot kamera | 20.5 mm | 17 – 24 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.