Jigs and fixtures
Foldable Retro Sunset Phone Stand
- Bounding box
- 95.3 × 147 × 18 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Foldable portable retro sunset phone stand, pin hinge with filament, multicolor for Bambu A1 AMS
Parameters
| Name | Value | Range |
|---|---|---|
| Stand width | 88 mm | 70 – 120 |
| Phone plate length | 90 mm | 70 – 120 |
| Viewing angle from table | 68 deg | 55 – 78 |
| Rear leg angle from table | 80 deg | 65 – 85 |
| Bottom lip height | 12 mm | 6 – 20 |
| Bottom lip thickness | 4 mm | 3 – 6 |
| Cable gap width | 30 mm | 10 – 60 |
| Leg arm width | 10 mm | 8 – 14 |
| Pin hole diameter for 1.75 mm filament | 2.2 mm | 1.9 – 3.2 |
| Hinge clearance | 0.5 mm | 0.3 – 0.8 |
| Sun diameter | 34 mm | 24 – 44 |
| Inlay depth | 1.2 mm | 0.8 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
