Brackets and mounts
FLEXCLICK 4 Parametric Enclosure
- Bounding box
- 82.0 × 72.0 × 21.0 mm
- Engine
- Precision B-rep
- Parameters
- 42
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Design a parametric 3D-printable enclosure "FLEXCLICK 4": a compact 4-key macro pad, matte black, rounded corners, minimalist. Keep ALL dimensions as editable parameters/sliders. KEY LAYOUT: 4 key openings in a T/arrow layout: 1 key on top, 3 keys below (left, center, right). Standard MX pitch 19.05 mm. Switch cutouts are PLACEHOLDERS 14 x 14 mm (final switches/PCB not chosen yet, do not add detailed switch geometry). PARTS (separate bodies): top case, bottom case, replaceable switch plate, PCB support area, bottom plate, screw bosses, 4 rubber foot recesses. VALUES (starting values): - Outer size approx 82 x 66 mm, outer corner radius 8 mm - Wall thickness 2.4 mm, floor 2.5 mm, switch plate 1.5 mm - Fit tolerance 0.25 mm - Top aperture: just larger than the key cluster, approx 62 x 43 mm, corner radius 3 mm. If only rectangular is possible, keep that; the key cluster is T-shaped. - Screws: M2.5. Boss diameter 6 mm, pilot hole 2.2 mm - Cover screws near the outer corners, about 8 mm inside the edge - Plate screws OUTSIDE the switch cutouts, must not intersect them - USB-C opening at the BACK, approx 10 x 4 mm, centered - Subtle logo on the FRONT: 22 x 6 mm, embossed 0.6 mm - 4 round rubber foot recesses on the underside, one near each corner PRINT RULES: no overhangs above 45 degrees where avoidable, flat bottom, parts print without supports if possible. Mark unknown dimensions as placeholders. EXPORT: editable project, STEP, separate STL per part, exploded view.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length | 82 mm | 50 – 150 |
| Outer width | 66 mm | 40 – 120 |
| Bottom housing height | 16 mm | 8 – 40 |
| Outer corner radius | 8 mm | 2 – 15 |
| Wall thickness | 2.4 mm | 1.2 – 5 |
| Bottom floor thickness | 2.5 mm | 1.5 – 6 |
| Internal cavity depth | 13.5 mm | 5 – 35 |
| Fit tolerance / clearance | 0.25 mm | 0.05 – 1 |
| Cover screw X offset | 33 mm | 20 – 45 |
| Cover screw Y offset | 25 mm | 15 – 35 |
| Plate screw X offset | 30 mm | 15 – 45 |
| Plate screw Y offset | 20 mm | 10 – 30 |
| Screw boss diameter | 6 mm | 3 – 10 |
| Boss pilot hole diameter | 2.2 mm | 1.5 – 4 |
| Clearance hole diameter | 2.6 mm | 1.8 – 5 |
| Counterbore diameter | 6 mm | 3 – 12 |
| Counterbore depth | 2 mm | 0.5 – 5 |
| Top bezel height | 5 mm | 2 – 10 |
| Top aperture length | 62 mm | 40 – 100 |
| Top aperture width | 43 mm | 30 – 80 |
| Top aperture corner radius | 3 mm | 0.5 – 10 |
| Switch plate recess depth | 1.5 mm | 0.5 – 5 |
| Front logo width | 22 mm | 10 – 40 |
| Front logo depth / protrusion | 6 mm | 2 – 12 |
| Front logo height | 0.6 mm | 0.2 – 2 |
| Switch plate thickness | 1.5 mm | 1 – 4 |
| Switch plate nominal length | 74 mm | 50 – 100 |
| Switch plate nominal width | 54 mm | 40 – 90 |
| Switch plate corner radius | 1.2 mm | 0.2 – 5 |
| Switch spacing / pitch | 19.05 mm | 18 – 25 |
| Switch cutout size | 14 mm | 10 – 20 |
| PCB standoff diameter | 6 mm | 3 – 12 |
| PCB standoff height | 6 mm | 2 – 20 |
| PCB standoff X offset | 28 mm | 10 – 40 |
| PCB standoff Y offset | 22 mm | 10 – 35 |
| Rubber foot recess diameter | 10 mm | 5 – 20 |
| Rubber foot recess depth | 1.2 mm | 0.2 – 3 |
| Rubber foot X offset | 32 mm | 15 – 45 |
| Rubber foot Y offset | 24 mm | 10 – 35 |
| USB-C opening width | 10 mm | 6 – 20 |
| USB-C opening height | 4 mm | 2.5 – 8 |
| USB-C opening center height | 8 mm | 0 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and