Brackets and mounts
FLEXCLICK 4 Keypad Enclosure
- Bounding box
- 92.0 × 72.6 × 17.0 mm
- Engine
- Precision B-rep
- Parameters
- 40
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable CAD enclosure for the FLEXCLICK 4, a compact premium gaming keypad. Design: * Matte black, minimalist housing with rounded corners. * Exactly four equal-sized switch openings in arrow layout: one centered above three (left, center, right). * No switches or keycaps installed. * Rear USB-C port opening. * Four rubber-foot mounting points. * Small Flick Gaming logo on the front. Construction: * Separate top and bottom housing. * Removable switch plate. * Internal space for a PCB and electronics. * Screw mounting points. * Modular design allowing future mechanical MX and Hall-effect switch plates. Requirements: * Practical FDM 3D-printable geometry. * Avoid unsupported overhangs and unnecessarily complex details. * Keep components separate and editable. * Do not invent switch or PCB dimensions. Use placeholders where dimensions are unknown. Create a precise CAD model, not just a visual rendering. Export STEP and separate STL files.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Length | 92 mm | 60 – 140 |
| Housing Width | 72 mm | 50 – 120 |
| Bottom Tray Height | 12 mm | 6 – 30 |
| Outer Corner Radius | 6 mm | 1 – 20 |
| Wall Thickness | 3 mm | 1.2 – 8 |
| Cavity Depth | 8 mm | 2 – 25 |
| Cover Screw Spacing X | 25 mm | 5 – 60 |
| Cover Screw Spacing Y | 32.5 mm | 5 – 55 |
| Plate Screw Spacing X | 32 mm | 10 – 55 |
| Plate Screw Spacing Y | 22 mm | 10 – 45 |
| Boss Diameter | 5 mm | 3 – 8 |
| M2.5 Pilot Hole Dia | 2.2 mm | 1.4 – 3 |
| Clearance Hole Dia | 3 mm | 2 – 4.5 |
| Counterbore Dia | 5 mm | 3.2 – 7 |
| Counterbore Depth | 2 mm | 0.5 – 3.5 |
| USB-C Opening Width | 9 mm | 6 – 16 |
| USB-C Opening Height | 4 mm | 2 – 8 |
| USB-C Centre Height | 6.5 mm | 3 – 14 |
| Rubber Foot Recess Dia | 8 mm | 4 – 14 |
| Foot Recess Depth | 1.5 mm | 0.5 – 3 |
| Foot Spacing X | 34 mm | 10 – 60 |
| Foot Spacing Y | 24 mm | 10 – 50 |
| PCB Standoff Dia | 4 mm | 2 – 8 |
| PCB Standoff Height | 2 mm | 1 – 8 |
| PCB Standoff Spacing X | 20 mm | 5 – 50 |
| PCB Standoff Spacing Y | 26 mm | 5 – 50 |
| Bezel Height | 5 mm | 2 – 12 |
| Aperture Length | 78 mm | 40 – 120 |
| Aperture Width | 58 mm | 30 – 100 |
| Aperture Corner Radius | 3 mm | 0.5 – 10 |
| Front Logo Width | 12 mm | 4 – 30 |
| Front Logo Height | 4 mm | 1 – 8 |
| Front Logo Emboss | 0.6 mm | 0.2 – 2 |
| Switch Plate Length | 76 mm | 40 – 120 |
| Switch Plate Width | 56 mm | 30 – 100 |
| Switch Plate Thickness | 3 mm | 1 – 6 |
| Switch Plate Corner Radius | 3 mm | 0.5 – 10 |
| Plate Recess Below Bezel | 1 mm | 0 – 4 |
| Switch Opening Size | 14 mm | 10 – 20 |
| Switch Pitch (MX) | 19.05 mm | 15 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and