Mechanical parts
Farm Site Plan - 160x60 ft Shed (2D)
- Bounding box
- 640.0 × 400.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 39
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
create a drawing and change the followin in it change shed size to 160x60ft, relocate water tank in from of shed and remove the exisitng one,place septic tank infornt of shade east side of size 32x14x10ft,80kld sewage treatment plant,mark buffalos orientation from south to north inside shed and locate the milking area at suitable location and shift the labour room near the shed after the road reomve farm house markup. prepare 2d drawing
Parameters
| Name | Value | Range |
|---|---|---|
| Drawing Scale | 2 mm/ft | 1 – 5 |
| Base Plate Thickness | 6 mm | 2 – 20 |
| Plate Corner Radius | 8 mm | 0 – 30 |
| Building Wall Height | 3 mm | 1 – 10 |
| Wall Thickness | 2 ft | 0.5 – 6 |
| Site Length E-W | 320 ft | 100 – 600 |
| Site Width N-S | 200 ft | 100 – 500 |
| Road Width | 20 ft | 8 – 40 |
| Road Line Height | 0.8 mm | 0.2 – 3 |
| Access Road X (west edge) | 220 ft | 50 – 550 |
| Shed Length (E-W) | 160 ft | 50 – 300 |
| Shed Width (N-S) | 60 ft | 20 – 150 |
| Shed X Position | 10 ft | 0 – 400 |
| Shed Y Position | 110 ft | 0 – 400 |
| Buffalo Direction Arrows | 5 pcs | 1 – 10 |
| Arrow Length (S to N) | 30 ft | 10 – 50 |
| Milking Parlour Length | 30 ft | 10 – 80 |
| Milking Parlour Width | 30 ft | 10 – 80 |
| Milking X Position | 175 ft | 0 – 500 |
| Milking Y Position | 130 ft | 0 – 400 |
| Milking Stalls | 6 pcs | 2 – 12 |
| Labour Room Length | 30 ft | 10 – 80 |
| Labour Room Width | 25 ft | 10 – 80 |
| Labour Room X Position | 250 ft | 0 – 500 |
| Labour Room Y Position | 130 ft | 0 – 400 |
| Water Tank Diameter | 20 ft | 6 – 60 |
| Water Tank Drawn Height | 4 mm | 1 – 20 |
| Water Tank X (in front of shed) | 45 ft | 0 – 500 |
| Water Tank Y (in front of shed) | 90 ft | 0 – 400 |
| Septic Tank Length | 32 ft | 10 – 100 |
| Septic Tank Width | 14 ft | 6 – 60 |
| Septic Tank Depth | 10 ft | 4 – 30 |
| Septic Tank X (east side) | 130 ft | 0 – 500 |
| Septic Tank Y (in front of shed) | 84 ft | 0 – 400 |
| STP Length | 30 ft | 8 – 80 |
| STP Width | 30 ft | 8 – 80 |
| STP X Position | 175 ft | 0 – 500 |
| STP Y Position | 55 ft | 0 – 400 |
| STP Capacity | 80 KLD | 10 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.