Enclosures and housings
F/A-18-style Twin-EDF Airframe Structural Set (Exploded)
- Bounding box
- 4711.5 × 453.0 × 270.9 mm
- Engine
- Precision B-rep
- Parameters
- 61
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Develop a fully parametric 3D CAD model of a 1500 mm long F/A-18 Super Hornet-inspired twin EDF RC aircraft. The aircraft is to be constructed primarily from plywood and balsa wood. Do not create only an external shell or visual model. Develop a complete engineering assembly containing: - Fuselage formers at defined longitudinal stations. - Longitudinal fuselage stringers. - Wing ribs, main spars, rear spars and shear webs. - Structural wing-to-fuselage carry-through. - Interlocking joints and accurately positioned assembly interfaces. - Twin vertical stabilizers and horizontal stabilators. - Twin 70 mm EDF installation provisions. - Battery and ESC installation provisions. - Access panels and removable structural sections. Use a common aircraft coordinate system, with X longitudinal, Y lateral and Z vertical. All components must be dimensionally positioned relative to the same origin. Create separate editable components and an assembled model. Include an assembly tree, component dimensions, material specifications and manufacturing drawings. Do not invent dimensions for unknown components. Identify missing engineering inputs and request clarification before finalising those components. Work progressively, beginning with the external geometry and reference coordinate system, then developing the internal structure.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 400 mm | 200 – 1200 |
| Fuselage Width (Y) | 170 mm | 80 – 400 |
| Fuselage Height (Z) | 190 mm | 80 – 400 |
| Former Count | 5 - | 2 – 12 |
| Former Station Spacing | 80 mm | 20 – 200 |
| Former Ply Thickness | 3 mm | 1 – 10 |
| Former Lightening Hole Dia | 34 mm | 2 – 60 |
| Stringer Count | 8 - | 3 – 24 |
| Stringer Square Section | 4 mm | 1 – 12 |
| Stringer Length | 300 mm | 50 – 1500 |
| Wing Chord | 120 mm | 60 – 400 |
| Airfoil Thickness Ratio | 0.12 - | 0.04 – 0.2 |
| Wing Rib Count | 6 - | 2 – 20 |
| Rib Spacing | 60 mm | 20 – 200 |
| Rib Balsa Thickness | 3 mm | 1 – 10 |
| Rib Lightening Hole Dia | 18 mm | 2 – 60 |
| Spar Length (Half Span) | 300 mm | 50 – 1500 |
| Main Spar Width | 6 mm | 2 – 30 |
| Main Spar Height | 12 mm | 3 – 60 |
| Rear Spar Width | 4 mm | 2 – 30 |
| Rear Spar Height | 8 mm | 3 – 60 |
| Main Spar Chord Station | 0.25 - | 0.05 – 0.6 |
| Rear Spar Chord Station | 0.7 - | 0.3 – 0.95 |
| Shear Web Thickness | 2 mm | 1 – 10 |
| Carry-Through Box Depth (X) | 50 mm | 20 – 200 |
| Carry-Through Width (Y) | 160 mm | 40 – 400 |
| Carry-Through Height (Z) | 60 mm | 20 – 200 |
| Carry-Through Wall | 4 mm | 1.5 – 20 |
| Carry-Through Bolt Dia | 5 mm | 1 – 16 |
| Fin Root Chord | 120 mm | 40 – 400 |
| Fin Tip Chord | 70 mm | 20 – 300 |
| Fin Height | 160 mm | 40 – 500 |
| Fin LE Sweep | 45 mm | 0 – 300 |
| Fin Thickness | 4 mm | 1 – 20 |
| Fin Cant Angle | 18 deg | 0 – 45 |
| Fin Y Offset from CL | 45 mm | 0 – 200 |
| Stabilator Chord | 110 mm | 40 – 400 |
| Stabilator Total Span | 200 mm | 40 – 1200 |
| Stabilator t/c Ratio | 0.09 - | 0.03 – 0.18 |
| Stabilator Pivot Dia | 6 mm | 2 – 20 |
| EDF Unit Diameter | 70 mm | 40 – 120 |
| EDF Ring Outside Dia | 78 mm | 45 – 140 |
| EDF Ring Length | 12 mm | 4 – 60 |
| EDF Mount Flange Dia | 94 mm | 50 – 180 |
| EDF Flange Thickness | 3 mm | 1 – 12 |
| EDF Centre Spacing (Y) | 110 mm | 60 – 400 |
| EDF Flange Bolt Dia | 3 mm | 1 – 8 |
| Battery Tray Length | 150 mm | 40 – 400 |
| Battery Tray Width | 60 mm | 20 – 300 |
| Tray Ply Thickness | 3 mm | 1 – 12 |
| Tray Side Rail Height | 12 mm | 0 – 60 |
| Strap Slot Count | 3 - | 1 – 8 |
| Strap Slot Width | 6 mm | 1 – 30 |
| Access Panel Length | 80 mm | 20 – 300 |
| Access Panel Width | 60 mm | 20 – 300 |
| Panel Thickness | 2.5 mm | 1 – 10 |
| Panel Fastener Dia | 2.5 mm | 0.5 – 10 |
| Panel Count | 3 - | 1 – 6 |
| Skin Panel Section Length | 300 mm | 50 – 1500 |
| Fuselage Skin Radius | 88 mm | 20 – 300 |
| Skin Sheet Thickness | 1.5 mm | 0.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Honeycomb Flow Straightener
Create a single-piece, 3D-printable honeycomb flow straightener for a DIY wind tunnel. Exact dimensions: Outer width: 200 mm Outer height: 200 mm Depth: 60 mm Hexagonal honeyc
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Desktop Air Purifier Assembly
# DESIGN: PORTABLE DESKTOP AIR PURIFIER WITH MINIATURE CENTRIFUGAL FAN Create a detailed, dimensionally accurate, 3D mechanical CAD assembly of a compact portable desktop air puri
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
