Mechanical parts
Extended 5 mm L Shelf Support Peg
- Bounding box
- 86 × 20 × 18 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Adjusted Extended 5 mm L Shelf Support Peg: arm_length=65, arm_width=20, arm_thickness=9, stop_height=18, stop_thickness=5, peg_insert_length=16, peg_diameter=5
Parameters
| Name | Value | Range |
|---|---|---|
| Peg diameter | 5 mm | 4.6 – 5.2 |
| Insert length | 16 mm | 8 – 20 |
| Inward shelf support reach | 65 mm | 15 – 65 |
| Support width | 20 mm | 8 – 20 |
| Support thickness | 9 mm | 4 – 9 |
| Wall stop thickness | 5 mm | 2 – 5 |
| Wall stop height | 18 mm | 9 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.