Mechanical parts
Exploded Full-Rim Rectangular Eyeglass Frame
- Bounding box
- 877.6 × 44.0 × 13.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- September 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a full-rim rectangular prescription eyeglass frame for 3D printing. Lens opening width 52 mm, lens opening height 38 mm, bridge width 15 mm, temple/arm length 135 mm. The frame should resemble a simple, thin, squared rectangular plastic eyeglass frame, similar to the INNOV 51. Make the front frame and both temples separate printable components. Include a normal eyeglass hinge connection. Keep the lens openings clear and do not create lenses. All dimensions must be editable parameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Front Overall Width | 130 mm | 80 – 180 |
| Front Overall Height | 44 mm | 25 – 70 |
| Front Rim Depth | 3 mm | 1 – 8 |
| Lens Opening Width | 52 mm | 20 – 70 |
| Lens Opening Height | 38 mm | 15 – 60 |
| Bridge Width | 15 mm | 5 – 25 |
| Hinge Lug Reach | 3 mm | 1 – 8 |
| Temple Length | 135 mm | 90 – 160 |
| Temple Start Width | 6 mm | 3 – 10 |
| Temple Start Height | 4 mm | 2.5 – 8 |
| Temple Mid Width | 4.5 mm | 2 – 8 |
| Temple Mid Height | 3.2 mm | 2 – 6 |
| Temple End Width | 3.5 mm | 1.5 – 6 |
| Temple End Height | 2.5 mm | 1.5 – 6 |
| Ear Bend Length | 30 mm | 5 – 60 |
| Ear Bend Drop | 10 mm | 2 – 20 |
| Hinge Barrel Diameter | 4.2 mm | 2 – 8 |
| Hinge Barrel Height | 6 mm | 3 – 10 |
| Hinge Pin Diameter | 1.2 mm | 0.8 – 3 |
| Hinge Pin Length | 5 mm | 3 – 10 |
| Layout Gap | 150 mm | 50 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.