Mechanical parts
EOD Quadcopter Drone with Soft Gripper
- Bounding box
- 199.7 × 199.7 × 78.1 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
Advanced military EOD drone, tactical quadcopter, desert tan color palette, featuring a multi-jointed octopus-like soft robotic gripper arm underneath, integrated shock absorbers, bottom-facing computer vision camera lens, high-tech engineering equipment, photorealistic, octane render, 4k resolution, clean mechanical details
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 100 mm | 60 – 160 |
| Body Width | 80 mm | 50 – 120 |
| Body Height | 25 mm | 15 – 40 |
| Arm Count | 4 | 3 – 8 |
| Arm Radius | 5 mm | 2 – 8 |
| Arm Length | 120 mm | 80 – 180 |
| Motor Pod Radius | 15 mm | 8 – 25 |
| Motor Pod Height | 20 mm | 10 – 35 |
| Gripper X Offset | 20 mm | -30 – 40 |
| Gripper Hub Radius | 12 mm | 6 – 20 |
| Gripper Hub Height | 15 mm | 10 – 25 |
| Finger Count | 6 | 2 – 10 |
| Finger Segments | 3 | 1 – 5 |
| Finger Spread Radius | 6 mm | 2 – 12 |
| Finger Base Radius | 4 mm | 1.5 – 8 |
| Finger Tip Radius | 1.5 mm | 0.5 – 5 |
| Finger Total Length | 45 mm | 20 – 80 |
| Finger Angle | 40 deg | 10 – 70 |
| Finger Curl Angle | 15 deg | 0 – 40 |
| Camera X Offset | 0 mm | -30 – 40 |
| Camera Housing Radius | 10 mm | 4 – 18 |
| Camera Housing Height | 20 mm | 8 – 30 |
| Lens Radius | 6 mm | 2 – 10 |
| Lens Height | 8 mm | 3 – 15 |
| Lens Glass Radius | 5 mm | 1 – 8 |
| Lens Glass Height | 2 mm | 0.5 – 4 |
| Shock Body Radius | 6 mm | 2 – 10 |
| Shock Body Length | 15 mm | 5 – 25 |
| Leg Radius | 4 mm | 1.5 – 7 |
| Leg Length | 35 mm | 20 – 60 |
| Foot Radius | 8 mm | 4 – 14 |
| Foot Thickness | 4 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.