Brackets and mounts
Eddy Current Brake Baseplate Assembly
- Bounding box
- 432.0 × 200.0 × 110.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Eddy current brake: 400x200x10 aluminum baseplate, four 6.5 mm corner holes, two 8x150 mm longitudinal slots for two KP08 pillow blocks 120 mm apart, transverse slots for adjustable magnet sliding bracket near one end, and a 12 V DC motor on one side of the shaft.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate length | 400 mm | 300 – 600 |
| Plate width | 200 mm | 150 – 300 |
| Plate thickness | 10 mm | 6 – 20 |
| Corner hole dia | 6.5 mm | 4 – 10 |
| Corner hole inset | 15 mm | 8 – 30 |
| Pillow slot width | 8 mm | 6 – 12 |
| Pillow slot length | 150 mm | 100 – 200 |
| Slot offset from centerline | 32.5 mm | 20 – 45 |
| Pillow block spacing | 120 mm | 80 – 140 |
| KP08 base length | 76 mm | 60 – 90 |
| KP08 base width | 28 mm | 20 – 40 |
| KP08 base thickness | 8 mm | 5 – 12 |
| Bearing center height | 15 mm | 12 – 20 |
| Shaft diameter | 8 mm | 6 – 10 |
| Bracket slot width | 6.5 mm | 5 – 10 |
| Bracket slot length | 30 mm | 20 – 60 |
| Bracket slot pitch | 22 mm | 15 – 30 |
| Slot center offset (Y) | 30 mm | 25 – 45 |
| Eddy disc diameter | 110 mm | 80 – 150 |
| Eddy disc thickness | 6 mm | 3 – 12 |
| Magnet air gap | 2 mm | 1 – 6 |
| Motor diameter | 30 mm | 24 – 30 |
| Motor length | 60 mm | 40 – 80 |
| Motor clamp hole dia | 5.5 mm | 4 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and