Mechanical parts
Dual-Servo Rotating Arm Joint (25 mm Square-Tube)
- Bounding box
- 64.0 × 56.0 × 180.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
Desine a robotic arm joint that looks kinda like the one i send u but make it be able to be controlled by two DS3218 motor working together, alsow make it be actualy be able to rotate, and make 25 by 25 mm and 1.5 inch deep cutounts for the attachement of sqware hollow metal rods
Parameters
| Name | Value | Range |
|---|---|---|
| Square Tube Size | 25 mm | 10 – 40 |
| Socket Depth (1.5 in) | 38.1 mm | 10 – 45 |
| Pivot Shaft Bore | 10 mm | 4 – 20 |
| Pivot Drum Diameter | 40 mm | 20 – 70 |
| Pivot Drum Width | 31 mm | 12 – 60 |
| Belt Groove Width | 9 mm | 0 – 20 |
| Belt Groove Depth | 2 mm | 0 – 5 |
| Base Block Length (X) | 56 mm | 34 – 100 |
| Base Block Width (Y) | 48 mm | 34 – 100 |
| Base Block Height | 50 mm | 50 – 100 |
| Yoke Plate Thickness | 6 mm | 3 – 16 |
| Yoke Plate Gap | 30 mm | 15 – 60 |
| Yoke Plate Height | 76 mm | 40 – 140 |
| Yoke Plate Length (X) | 44 mm | 20 – 90 |
| Output Tower Size | 48 mm | 30 – 90 |
| Output Tower Height | 56 mm | 50 – 120 |
| Cap Bolt Hole Dia | 3.2 mm | 2 – 8 |
| Edge Fillet Radius | 2 mm | 0 – 5 |
| Servo Screw Hole Dia | 3.2 mm | 2 – 6 |
| Servo Ear Hole Spacing | 49.5 mm | 10 – 80 |
| Servo Tab Thickness | 4 mm | 2 – 10 |
| Servo Tab Width (Y) | 56 mm | 20 – 90 |
| Servo Tab Height | 22 mm | 8 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.