Mechanical parts
Door Frame Jamb with Hinge Holes
- Bounding box
- 50.0 × 40.0 × 300.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- September 18, 2026
Download
Free to download and use. See the terms.
The prompt
we dont want door , we will develop door frame for attached hinge and need hole on frame
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length | 300 mm | 100 – 1000 |
| Face Width | 50 mm | 25 – 150 |
| Return Depth | 40 mm | 20 – 150 |
| Section Thickness | 3 mm | 1.5 – 8 |
| Inner Corner Fillet | 1 mm | 0 – 1.2 |
| Hinge Count | 2 pcs | 1 – 4 |
| Hinge Spacing | 180 mm | 50 – 600 |
| Hinge Offset From Edge | 28 mm | 10 – 45 |
| Hinge Leaf Width | 20 mm | 10 – 40 |
| Hinge Leaf Length | 75 mm | 30 – 150 |
| Mortise Recess Depth | 1 mm | 0 – 1.5 |
| Hinge Screw Hole Dia | 4.5 mm | 2 – 8 |
| Hinge Screw Pitch | 32 mm | 10 – 60 |
| Frame Fixing Hole Count | 3 pcs | 0 – 6 |
| Fixing Hole Dia | 4.5 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.