Mechanical parts
DeWalt – snett rörfäste för verktygsvägg
- Bounding box
- 110 × 107.3 × 132 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Ersätter gaffelarmarna med ett öppet cylindriskt hölster vinklat uppåt och ut från en plan väggplatta. Chucken sätts ned först. Biltema 12 mm rutnät, fyra 4.5 mm frigångshål på 60x84 mm centrum. 60 mm innerdiameter är preliminär, måste provpassas mot DeWalt DCD791; inget batterifäste.
Parameters
| Name | Value | Range |
|---|---|---|
| Tube inside diameter - test fit | 60 mm | 45 – 75 |
| Tube length | 80 mm | 60 – 105 |
| Tube wall | 5 mm | 4 – 8 |
| Outward angle from vertical | 25 deg | 15 – 35 |
| Wall grid pitch | 12 mm | 10 – 14 |
| Screw clearance in plastic | 4.5 mm | 4.2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.