Brackets and mounts
Desktop Cable Organiser & Phone Dock
- Bounding box
- 160 × 90 × 85.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
A desktop cable organiser and phone dock in one piece. Base plate 160 x 90 mm with rounded corners. At the back, a phone rest tilted 65 degrees from horizontal with a 14 mm front lip and a 12 mm wide slot through the lip for the charging cable. In front of it, a row of six cable clips, each a 7 mm slot with a 5 mm opening so cables press in and stay. On the right side, a round pen cup with 30 mm inner diameter and 60 mm height. Underneath the base, four shallow circular recesses, 10 mm diameter and 1.5 mm deep, for rubber feet. 3D printed in PETG without supports.
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 160 mm | 120 – 250 |
| Base depth | 90 mm | 60 – 180 |
| Base thickness | 4 mm | 2 – 8 |
| Phone rest angle from horizontal | 65 deg | 45 – 80 |
| Front lip height | 14 mm | 8 – 25 |
| Cable slot width | 12 mm | 6 – 20 |
| Cable clip slot diameter | 7 mm | 5 – 12 |
| Cable clip opening width | 5 mm | 3 – 8 |
| Number of cable clips | 6 mm | 2 – 10 |
| Pen cup inner diameter | 30 mm | 20 – 60 |
| Pen cup height | 60 mm | 30 – 100 |
| Pen cup wall thickness | 2.4 mm | 1.2 – 6 |
| Foot recess diameter | 10 mm | 6 – 20 |
| Foot recess depth | 1.5 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and