Mechanical parts
Desk Nameplate with Figurine
- Bounding box
- 200 × 70 × 134.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 32
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
3D yazıcıda baskı yapılacabilecek şekilde görseli ayarlarmısın
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 200 mm | 100 – 300 |
| Depth | 70 mm | 40 – 150 |
| Height | 18 mm | 10 – 40 |
| Corner radius | 12 mm | 2 – 30 |
| Top chamfer | 2 mm | 0 – 5 |
| Width | 130 mm | 50 – 200 |
| Height | 75 mm | 30 – 150 |
| Thickness | 4 mm | 2 – 10 |
| Corner radius | 5 mm | 0 – 15 |
| Slot depth | 5 mm | 2 – 10 |
| Clearance | 0.4 mm | 0.1 – 1 |
| Plaque X position | 20 mm | -80 – 80 |
| Figurine X position | -65 mm | -90 – 90 |
| Pedestal size | 30 mm | 15 – 60 |
| Pedestal height | 10 mm | 3 – 20 |
| Leg height | 35 mm | 10 – 80 |
| Leg separation | 10 mm | 5 – 30 |
| Leg bottom diameter | 10 mm | 4 – 20 |
| Leg top diameter | 8 mm | 3 – 20 |
| Cuff diameter | 12 mm | 5 – 25 |
| Torso height | 25 mm | 10 – 60 |
| Torso bottom diameter | 20 mm | 8 – 40 |
| Torso top diameter | 16 mm | 6 – 40 |
| Shoulder sphere diameter | 7 mm | 4 – 15 |
| Shoulder separation | 16 mm | 8 – 40 |
| Arm diameter | 6 mm | 3 – 15 |
| Neck diameter | 5 mm | 3 – 10 |
| Neck height | 4 mm | 2 – 10 |
| Head diameter | 10 mm | 5 – 20 |
| Hat height | 9 mm | 3 – 20 |
| Hat bottom diameter | 9 mm | 5 – 20 |
| Hat top diameter | 10 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.