Jigs and fixtures
Deck standoff bar (print x4)
- Bounding box
- 6 × 6 × 15 mm
- Engine
- 3D Printing B-rep
- Parameters
- 5
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Adjusted Deck standoff bar (print x4): pilot_d=3.2
Parameters
| Name | Value | Range |
|---|---|---|
| Bar height | 15 mm | 6 – 40 |
| Bar square width | 6 mm | 5 – 12 |
| Vertical edge radius | 1 mm | 0.2 – 2 |
| Bottom/top edge chamfer | 0.4 mm | 0 – 1 |
| Pilot hole for M3 self-tap | 3.2 mm | 2.4 – 3.4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
