Jigs and fixtures
De'Longhi Dedica EC685 Wide Drip Tray
- Bounding box
- 149.0 × 150.0 × 26.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
I want a wider tray for my delonghi dedica ec 685. I want to be able to get two cups there without permanently holding them. It should be as big as the base of the machine is
Parameters
| Name | Value | Range |
|---|---|---|
| Tray Width (machine base width) | 149 mm | 120 – 220 |
| Tray Depth | 150 mm | 90 – 260 |
| Overall Height | 26 mm | 15 – 45 |
| Wall Thickness | 3 mm | 2 – 6 |
| Floor Thickness | 3 mm | 2 – 6 |
| Outer Corner Radius | 6 mm | 0 – 10 |
| Grate Thickness | 4 mm | 2 – 8 |
| Grate Support Ledge | 3.5 mm | 1.5 – 6 |
| Grate Side Clearance | 1 mm | 0.2 – 2 |
| Drain Slot Width | 3 mm | 1.5 – 6 |
| Drain Slot Pitch | 9 mm | 5 – 20 |
| Finger Notch Width | 50 mm | 20 – 80 |
| Finger Notch Depth | 9 mm | 4 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
