Mechanical parts
Cylindrical Stand with Curved Arm and Chocolate Cup
- Bounding box
- 105.0 × 40.0 × 108.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing cylindrical model. Keep the cylinder body, base and top valve unchanged. Add a thick, smooth curved arm emerging from the upper side of the cylinder, just below the top shoulder. The arm should curve upward and then extend to the right side of the model. Make the arm 6 mm thick. Add three spherical bubbles attached to the arm, with diameters of 9 mm, 12 mm and 15 mm. At the end of the arm, add a circular shallow cup, 40 mm in diameter and 5 mm deep, designed to hold one wrapped chocolate praline. Keep the cup level and the chocolate removable. All added parts must be securely connected to the existing model. Use millimeters. Keep the model suitable for FDM 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Height | 75 mm | 20 – 150 |
| Body Diameter | 32 mm | 10 – 80 |
| Base Diameter | 40 mm | 20 – 100 |
| Base Thickness | 5 mm | 2 – 20 |
| Valve Diameter | 16 mm | 4 – 40 |
| Valve Height | 10 mm | 2 – 30 |
| Fillet Radius | 3 mm | 0 – 8 |
| Arm Diameter | 6 mm | 2 – 12 |
| Arm Start X | 16 mm | 0 – 30 |
| Arm Start Z | 70 mm | 10 – 140 |
| Arm Bend Start Z | 80 mm | 20 – 150 |
| Arm Bend End X | 36 mm | 20 – 80 |
| Arm Bend End Z | 100 mm | 50 – 150 |
| Arm End X | 65 mm | 40 – 120 |
| Arm End Z | 100 mm | 50 – 150 |
| Arm Bend Radius | 20 mm | 5 – 50 |
| Bubble 1 Diameter | 9 mm | 4 – 30 |
| Bubble 2 Diameter | 12 mm | 4 – 30 |
| Bubble 3 Diameter | 15 mm | 4 – 30 |
| Bubble 1 X | 42 mm | 20 – 100 |
| Bubble 2 X | 50 mm | 20 – 100 |
| Bubble 3 X | 58 mm | 20 – 100 |
| Cup Diameter | 40 mm | 20 – 80 |
| Cup Depth | 5 mm | 2 – 20 |
| Cup Bottom Thickness | 2 mm | 1 – 5 |
| Cup Wall Thickness | 2 mm | 1 – 6 |
| Cup Bottom Z | 101 mm | 80 – 160 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.