Mechanical parts
Cycloidal Drive NEMA17 Assembly
- Bounding box
- 70.0 × 70.0 × 62.8 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- October 17, 2026
Download
Free to download and use. See the terms.
The prompt
could you generate a cycloidal drive that fits on a longrunner motor 17hd48002h-22b with a final output of 200 rpm and only using bearings with 1 an id of 50mm and od of 65mm 2 an id of 15mm and od of 21mm
Parameters
| Name | Value | Range |
|---|---|---|
| Adapter Plate Size | 42 mm | 30 – 80 |
| Adapter Plate Thickness | 8 mm | 3 – 20 |
| Rear Center Clearance | 22 mm | 10 – 40 |
| NEMA17 Hole Spacing | 31 mm | 20 – 60 |
| NEMA17 Hole Diameter | 3.4 mm | 2 – 6 |
| Small Bearing ID | 15 mm | 5 – 30 |
| Small Bearing OD | 21 mm | 10 – 45 |
| Small Bearing Width | 5 mm | 2 – 15 |
| Output Bearing ID | 50 mm | 20 – 100 |
| Output Bearing OD | 65 mm | 30 – 130 |
| Output Bearing Width | 8 mm | 3 – 20 |
| Input Shaft Length | 30 mm | 25 – 80 |
| Input Journal Diameter | 15 mm | 5 – 30 |
| Motor Coupling Bore | 5 mm | 2 – 15 |
| Eccentric Throw | 1 mm | 0.2 – 5 |
| Cycloidal Disc OD | 48 mm | 20 – 100 |
| Cycloidal Disc Thickness | 8 mm | 3 – 12 |
| Cycloidal Disc Center Bore | 21 mm | 10 – 50 |
| Disc Lobe Count | 5 count | 3 – 10 |
| Disc Output Pin Hole Diameter | 6 mm | 2 – 15 |
| Disc Output Pin Hole Radius | 18 mm | 5 – 45 |
| Ring Housing OD | 70 mm | 30 – 160 |
| Ring Housing Length | 20 mm | 15 – 60 |
| Ring Pin Diameter | 6 mm | 2 – 15 |
| Ring Pin Radius | 25 mm | 10 – 70 |
| Ring Pin Count | 6 count | 3 – 12 |
| Output Flange Diameter | 60 mm | 20 – 120 |
| Output Flange Thickness | 10 mm | 3 – 30 |
| Output Pin Diameter | 6 mm | 2 – 15 |
| Output Pin Radius | 18 mm | 5 – 45 |
| Output Pin Count | 6 count | 3 – 12 |
| Output Shaft Diameter | 10 mm | 3 – 30 |
| Output Shaft Length | 20 mm | 5 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.