Mechanical parts
Custodia serpenti 45° — soli supporti senza basetta
- Bounding box
- 44.4 × 121.9 × 134.6 mm
- Engine
- Precision B-rep
- Parameters
- 40
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Revisione richiesta: eliminata completamente la basetta piena a terra. Restano solo due pareti di supporto alleggerite e la traversa iniziale, appoggiate direttamente a Z=0 e collegate tra loro. Mantenuti inclinazione45°, piccoli contatti a distacco, tre serpenti in rilievo e linguetta protetta libera. Verifiche geometriche su custodia, libertà linguetta, supporto continuo e contatto con custodia.
Parameters
| Name | Value | Range |
|---|---|---|
| Larghezza telecomando | 39 mm | 20 – 80 |
| Lunghezza telecomando | 160 mm | 60 – 250 |
| Spessore telecomando | 7 mm | 3 – 25 |
| Gioco per lato | 0.3 mm | 0.1 – 1 |
| Gioco verticale | 0.4 mm | 0.1 – 1.5 |
| Gioco longitudinale | 0.5 mm | 0.1 – 2 |
| Pareti laterali | 2.4 mm | 1.6 – 4 |
| Parete di arresto | 3 mm | 2 – 5 |
| Spessore base | 2 mm | 1.2 – 3 |
| Spessore bordi superiori | 2 mm | 1.2 – 3 |
| Bordo superiore per lato | 6 mm | 3 – 9 |
| Raggio angoli esterni | 3 mm | 1 – 5 |
| Raggio apertura superiore | 6 mm | 2 – 9 |
| Bordo superiore in fondo | 4 mm | 2 – 8 |
| Lunghezza invito | 8 mm | 4 – 14 |
| Allargamento invito per lato | 2 mm | 1 – 3 |
| Raccordo bordi superiori | 0.6 mm | 0.2 – 0.7 |
| Raggio profilo laterale telecomando | 4 mm | 4 – 12 |
| Lunghezza tratto elastico | 24 mm | 18 – 32 |
| Larghezza linguetta | 8 mm | 6 – 12 |
| Spessore linguetta | 1.2 mm | 0.8 – 1.6 |
| Luce fessure laterali | 1.2 mm | 0.8 – 1.8 |
| Sporgenza per sblocco | 6 mm | 4 – 9 |
| Altezza dentino sopra base | 1.6 mm | 1 – 2 |
| Posizione arresto da imbocco | 0.7 mm | 0 – 1 |
| Spessore cornice frontale | 2.4 mm | 2 – 4 |
| Luce davanti alla linguetta | 1.2 mm | 0.8 – 2 |
| Altezza rilievo serpenti | 0.45 mm | 0.3 – 0.8 |
| Lunghezza serpenti | 95 mm | 60 – 110 |
| Ampiezza serpente posteriore | 5 mm | 3 – 7 |
| Larghezza tratto posteriore | 2.4 mm | 1.6 – 3 |
| Larghezza tratto bande | 1.1 mm | 0.8 – 1.4 |
| Ondulazioni serpenti | 2 count | 1 – 3 |
| Inclinazione stampa | 45 deg | 40 – 50 |
| Altezza iniziale da piano | 6 mm | 4 – 10 |
| Spessore pareti supporto | 1.2 mm | 0.8 – 1.6 |
| Scarico tra parete e custodia | 0.4 mm | 0.25 – 0.6 |
| Larghezza punti a rottura | 0.5 mm | 0.4 – 0.8 |
| Lunghezza punti a rottura | 1.2 mm | 0.8 – 2 |
| Passo punti a rottura | 12 mm | 8 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
