Mechanical parts
Custodia R4 con linguetta di blocco PETG
- Bounding box
- 44.4 × 169.5 × 11.4 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Custodia sagomata per telecomando 39x160x7 con fianchi bombati ad arco R4, pareti2.4 base2 bordi superiori2 mm. Aggiunta linguetta integrata nel fondo all'imbocco: flessione24 mm, larghezza8, spessore1.2, dentino con rampa e faccia di arresto, aletta esterna6 mm per sblocco. Prototipo dimensionato per PETG, da verificare con stampa di prova; in TPU la tenuta sarà più morbida.
Parameters
| Name | Value | Range |
|---|---|---|
| Larghezza telecomando | 39 mm | 20 – 80 |
| Lunghezza telecomando | 160 mm | 60 – 250 |
| Spessore telecomando | 7 mm | 3 – 25 |
| Gioco per lato | 0.3 mm | 0.1 – 1 |
| Gioco verticale | 0.4 mm | 0.1 – 1.5 |
| Gioco longitudinale | 0.5 mm | 0.1 – 2 |
| Pareti laterali | 2.4 mm | 1.6 – 4 |
| Parete di arresto | 3 mm | 2 – 5 |
| Spessore base | 2 mm | 1.2 – 3 |
| Spessore bordi superiori | 2 mm | 1.2 – 3 |
| Bordo superiore per lato | 6 mm | 3 – 9 |
| Raggio angoli esterni | 3 mm | 1 – 5 |
| Raggio apertura superiore | 6 mm | 2 – 9 |
| Bordo superiore in fondo | 4 mm | 2 – 8 |
| Lunghezza invito | 8 mm | 4 – 14 |
| Allargamento invito per lato | 2 mm | 1 – 3 |
| Raccordo bordi superiori | 0.6 mm | 0.2 – 0.7 |
| Raggio profilo laterale telecomando | 4 mm | 4 – 12 |
| Lunghezza tratto elastico | 24 mm | 18 – 32 |
| Larghezza linguetta | 8 mm | 6 – 12 |
| Spessore linguetta | 1.2 mm | 0.8 – 1.6 |
| Luce fessure laterali | 1.2 mm | 0.8 – 1.8 |
| Sporgenza per sblocco | 6 mm | 4 – 9 |
| Altezza dentino sopra base | 1.6 mm | 1 – 2 |
| Posizione arresto da imbocco | 0.7 mm | 0 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
