Mechanical parts
Corrected curved column saddle — concealed strap bracket
- Bounding box
- 75 × 155.8 × 121.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Visible true concave 18.144-inch column-matching cylindrical back, 75mm wide rear saddle, 6-inch arm, forward strap groove within 1-inch shelf backing, printable Bambu A1/P1S.
Parameters
| Name | Value | Range |
|---|---|---|
| Column radius | 230.46 mm | 180 – 300 |
| Shelf radial depth | 152.4 mm | 100 – 190 |
| Wide curved column saddle | 75 mm | 55 – 95 |
| Narrow shelf-support arm | 38 mm | 28 – 55 |
| Height of shelf support top | 96 mm | 75 – 120 |
| Horizontal arm thickness | 10 mm | 8 – 15 |
| Triangular brace thickness | 13 mm | 9 – 20 |
| Upright strap backing height | 25.4 mm | 25.4 – 30 |
| Saddle front-to-back depth | 17 mm | 15 – 25 |
| Front retention lip | 7 mm | 4 – 12 |
| Strap groove vertical height | 25 mm | 25 – 25.4 |
| Recess into forward side | 6.5 mm | 5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.