Brackets and mounts
Cooler Fishing Tackle Organizer with Internal Rod Holders
- Bounding box
- 900.0 × 415.0 × 355.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
I want to use this cooler for fishing. I would like you to design an interior organizer for hooks, pliers, fishing lines, sinkers, and other fishing tackle. I also want you to install a PVC pipe or rod holder on each side inside the cooler to hold the fishing rods with their spinning reels. I mainly fish at marinas. I want you to engineer a practical design that allows me to carry two fishing rods with spinning reels inside this cooler. Please explain how I can build and install this design step by step. I already own this plastic cooler, and I need your help designing a custom fishing tackle box using it. Everything must be inside the cooler. Nothing should be attached to the outside or on top of the lid. The cooler must close completely so I can carry it with me.
Parameters
| Name | Value | Range |
|---|---|---|
| Cooler interior length | 610 mm | 400 – 900 |
| Cooler interior width | 355 mm | 250 – 500 |
| Cooler interior height | 305 mm | 200 – 500 |
| Cooler wall thickness | 25 mm | 10 – 60 |
| Cooler lid thickness | 25 mm | 10 – 60 |
| Organizer tray length | 590 mm | 400 – 880 |
| Organizer tray width | 335 mm | 200 – 470 |
| Organizer tray height | 120 mm | 50 – 220 |
| Tray wall thickness | 4 mm | 2 – 8 |
| Divider wall thickness | 3 mm | 2 – 8 |
| Number of cross dividers | 4 ea | 2 – 8 |
| Number of longitudinal dividers | 3 ea | 2 – 8 |
| PVC pipe outside diameter | 50 mm | 32 – 75 |
| PVC pipe inside diameter | 40 mm | 25 – 60 |
| Rod holder tube length | 520 mm | 300 – 700 |
| Rod holder bottom height inside cooler | 140 mm | 80 – 260 |
| Rod holder gap to side wall | 8 mm | 0 – 30 |
| Reel slot length | 180 mm | 80 – 300 |
| Reel slot width | 30 mm | 15 – 80 |
| Reel slot depth from top | 25 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and