Brackets and mounts
Connecting Rod with Mounting Lugs
- Bounding box
- 142.0 × 60.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a mechanical connecting rod in millimeters. On the left, create a small end cylinder with an outer diameter of 24mm, an inner through-hole diameter of 15mm, and a height of 20mm. On the right, positioned at a center-to-center distance of 120mm along the X-axis, create a half-ring big end with an outer diameter of 50mm, an inner radius of 16mm (diameter 32mm), and a height of 15mm, facing open to the right. Connect the two ends with a tapered beam neck that starts near the small end (at X=17mm) with a width of 10mm and widens towards the big end (at X=90mm) to a width of 20mm, with a height of 10mm centered vertically. Add two rectangular mounting lugs on the top and bottom sides of the big end opening, extending the total width to 60mm and thickness to 10mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Small End OD | 24 mm | 8 – 60 |
| Small End Bore Dia | 15 mm | 2 – 50 |
| Small End Height | 20 mm | 4 – 60 |
| Center Distance | 120 mm | 40 – 300 |
| Big End OD | 50 mm | 12 – 140 |
| Big End Bore Dia | 32 mm | 4 – 120 |
| Big End Height | 15 mm | 4 – 60 |
| Beam Root X | 17 mm | 2 – 40 |
| Taper Start X | 17 mm | 2 – 80 |
| Taper End X | 90 mm | 20 – 280 |
| Neck Width at Small End | 10 mm | 2 – 40 |
| Neck Width at Big End | 20 mm | 2 – 60 |
| Neck Height | 10 mm | 2 – 40 |
| Total Width Across Lugs | 60 mm | 12 – 140 |
| Lug Thickness (Z) | 10 mm | 2 – 40 |
| Lug Length (X) | 20 mm | 4 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and